10 Reasons Why Fiber Optic Cables are chosen over Copper cable

              Fiber or Copper: That’s the frequent  Question asked by costumers

When assessing which type of network cable you want to install, which type should you go with?Copper has various advantages, including the fact that it already exists in many places and is less expensive to connect network devices. While fiber optic cables are more expensive, there are several advantages that make it a more enticing cable infrastructure solution than its copper counterpart. Also, using fiber cables can lead to a greater return on investment. Keep these ten (10) advantages in mind when deciding whether to choose copper or fiber cabling.

 

10 reasons Professionals Choose Fiber Optic Cables

1.Durability

A Fiber optic cable is not metal-based it is made up of glass, thereby giving it resistance to corrode or rust. furthermore, when Compared to copper cables, fiber optic cables are thinner and lighter in weight. Fiber can withstand more pull pressure than copper and is less prone to damage and breakage

2. Fiber optic cable possess a faster transmission.

Fiber optic versus copper wire transmission can be boiled down to the speed of photons versus the speed of electrons. While fiber optic cables don’t travel at the speed of light, they come very close—only about 31 percent slower

3. Light cannot catch on fire.

An added benefit of fiber optic cables is that they are not a fire hazard. This can also be attributed to the same reason that the cables do not produce EMI—there is no electric current traveling through the core.

4. Longer Distances

Fiber optic cables can carry signals much farther than the typical 328-foot limitation for copper cables. For example, some 10 Gbps single mode fiber cables can carry signals almost 25 miles. The actual distance depends on the type of cable, the wavelength and the network.

5. temperature friendly Fiber is immune to temperature changes, severe weather and moisture, all of which can hamper the connectivity of copper cable. Plus, fiber does not carry electric current, so it’s not bothered by electromagnetic interference (EMI) that can interrupt data transmission. It also does not present a fire hazard like old or worn copper cables can

6. Greater Bandwidth

Copper cables were primarily designed for voice transmission and have a limited bandwidth. Fiber optic cables provide far greater bandwidth than copper and have a standardized performance up 10 Gbps. Keep in mind that fiber cable for carrying more data than copper cables of the same diameter. Within the fiber cable family, single mode fiber delivers up to twice the throughput of multimode fibre.

7. fibre optic cables is not affected by electromagnetic interference (EMI)

Copper wires that are not professionally installed will produce electromagnetic currents that can interfere with other wires and wreak havoc on a network. Fiber optic cables do not conduct electricity.

8. Compared to Copper, Fibre Optic Cables Are Safe and Fire Proof

Fiber optic cables are not fire hazards. This is due to the same reason that the cables do not produce EMI – there is no electric current traveling through the core.

9.Fiber optic transmission results in less attenuation.

Because the fiber optic cables are made of light, the cable travels over a long distance experiencing less signal loss than copper cabling. This is called low attenuation. Copper cables can only transmit information up to 9,328 ft due to power loss, whereas fiber cables can travel between 984.2 ft to 24.8 miles

10. Security

Your data is safe with fiber cable. It doesn’t radiate signals and is extremely difficult to tap. If the cable is tapped, it’s very easy to monitor because the cable leaks light, causing the entire system to fail. If an attempt is made to break the physical security of your fiber system, you’ll know it.

Fiber networks also enable you to put all your electronics and hardware in one central location, instead of having wiring closets with equipment throughout the building.